General Information
2-10 | CFW-11M G2
2
E.g.: CFW11MG21205T4OYZ corresponds to a CFW-11M G2 three-phase inverter of 1205 A, with input supply
voltage from 380 V to 480 V, with optional safety stop. The options for the inverter rated current under normal
duty (ND) are in
, according to the inverter rated output voltage.
Table 3.2:
Rated currents under normal duty (ND)
380-480 V
500-600 V
660-690 V
0634 = 634 A
0496 = 496 A
0439 = 439 A
1205 = 1205 A
0942 = 942 A
0834 = 834 A
1807 = 1807 A
1414 = 1414 A
1251 = 1251 A
2409 = 2409 A
1885 = 1885 A
1668 = 1668 A
3012 = 3012 A
2356 = 2356 A
2085 = 2085 A
2.7 RECEIPT AND STORAGE
The power units of the CFW-11M G2 are supplied in a wooden box.
The control units of the CFW-11M G2 are supplied in a cardboard box.
There is an identification label affixed to the outside of the package, the same as the one fixed on the inverter.
In order to open the package:
1. Remove the front cover of the package.
2. Remove the styrofoam protection.
Check if:
1. The nameplates correspond to the models purchased.
2. There were any damages during transportation.
Report any damage immediately to the carrier.
If the products are not immediately installed , store them in a clean and dry location (temperature between –
25 ºC and 60 ºC), with a cover to prevent the ingress of dust.
Figure 2.8:
Do not tilt the power units
