WEG CESTARI Worm Gearbox line, Instruction Manual

Page: 18 / 40

18 | Worm Gearbox line
6.8 Check list – Installation and assembly of gearboxxes
Receipt Checked
Paint Verification
Check for scratches, peeling and other imperfections.
Oxidation Verification
Check for the presence of oxidised points or areas on the gearbox and/or accessories .
Leakage Verification
Check for the presence of oil in seals, caps and joints.
Machined Parts Protection Verification
Check that machined parts are protected with protective oil.
Component Verification
Check if components used in the assembly are present.
Seals Verification
Check that the vent valve is sealed .
Verification of storage conditions
Check that the gearbox has been conditioned according to the instructions in the product
manual.
IInstallation Verificado
Checking the Working Position
Check that the gearbox is mounted in the position for which it was supplied .
Lube Oil Level Check
Check the lubricating oil level according to the product manual.
Vent Valve Seal Removal Check
Check that the vent valve seal has been completely removed before putting the gearbox into
operation.
Verification of Sealing Elements
Check seals, caps and other sealing elements for leaks and/or deformities of these elements.
Checking the gearbox installation
Check that the gearbox has been placed on the driven machine in accordance with the
recommendations of the product manual.
Application of Protective Oil in Machined Parts
Check whether protective oil has been applied to the machined parts after installing the
gearbox in the machine.