weedingtech Foamstream L12, User Manual

Page: 6 / 32

L12 – User manual – English (EU/USA) – 15/01/2020 - ISSUE 4
6
2 Introduction
Thank you for purchasing the Foamstream L12!
IT IS IMPORTANT THAT ALL OPERATORS READ AND
UNDERSTAND THESE INSTRUCTIONS BEFORE USING
THE MACHINE
Having read these instructions, the operator will:
• Understand how the L12 works
• Identify key components in the L12
• Know how to carry out pre-start and start-up
procedures
• Observe safe operating practices
• Be able to effectively operate the L12
• Be able to shut down and clean the L12
• Be able to perform basic maintenance and
troubleshooting tasks
PLEASE KEEP THESE INSTRUCTIONS IN A SAFE PLACE
FOR FUTURE REFERENCE
3 Important information
The following PPE (Personal Protective Equipment) are
recommended when operating the L12:
• Eye protection is required when handling
Foamstream® concentrate
• Gloves are required as the lance assembly will get hot
• Safety Footwear suitable for working in the areas
concerned is recommended
• No specific protective clothing is required, although
use of overalls and a HI-Viz vest is suggested as best
practice.
IT IS THE RESPONSIBILITY OF THE OPERATOR TO WEAR
APPROPRIATE PPE
Never operate the machine without checking that there are
adequate supplies of clean petrol/gasoline, clean diesel,
clean water, and clean Foamstream® concentrate in the
appropriate tanks.
The L12 produces
VERY HOT water. This can cause serious
burns and injury if used incorrectly.
Never point the lance at people or animals as this machine
can operate at high temperatures and high pressures.
All personnel operating a L12 machine must be deemed
competent to do so and must be adequately trained. A copy
of the training record is available on demand.
Always check the L12 for any damage before use. Damaged
cables, hoses or connections must be reported immediately,
and the machine taken out of use until repairs have been
completed.
Use only genuine Weedingtech spare parts and
Foamstream® consumables. This will ensure the best
performance of your machine and maintain the warranty of
the unit.
The L12 must never be modified, safety interlocks bypassed,
or settings adjusted (unless specified in these guidance
notes) without Weedingtech’s written consent.
Ensure that the L12 is placed in an area where there is
adequate ventilation when in use.