Standards and Safety
The EOTec 2104 Ethernet Ring Switch from Weed Instrument has been designed to meet the
following standards.
EMI emissions – FCC part 15, ICES 003, EN55022
EMC immunity – IEC61326-1
(-40°C To +85°C)
Install the Weed Ring Switch in accordance with local and national electrical
codes.
Lightning Danger: Do not work on equipment during periods of lightning
activity.
Do not connect a telephone line into one of the Ethernet RJ45 connectors.
This product is designed to meet electrical safety and Class I, Division 2 hazardous
specifications, but is currently awaiting regulatory approvals.
Refer to the Technical Specifications section, at the end of this manual, for complete
specifications on agency approvals.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures: Reorient or relocate the receiving antenna; Increase the
separation between the equipment and receiver; Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected; Consult the dealer or an
experienced radio/TV technician for help.
iii