background image

11

your nearest authorized service center or call
POULAN/WEED

EATER

at

1--800--554--6723.

WARRANTY PERIOD:

Any warranted part which is not scheduled for
replacement as required maintenance, or
which is scheduled only for regular inspection
to the effect of ”repair or replace as neces-
sary” shall be warranted for 2 years. Any war-
ranted part which is scheduled for replace-
ment as required maintenance shall be
warranted for the period of time up to the first
scheduled replacement point for that part.
DIAGNOSIS:

The

owner shall

not be

charged for diagnostic labor which leads to
the determination that a warranted part is de-
fective if the diagnostic work is performed at
an approved POULAN/WEED EATER ser-
vicing center. CONSEQUENTIAL DAM-
AGES: 
POULAN/WEED EATER may be li-
able

for

damages

to

other

engine

components caused by the failure of a war-
ranted part still under warranty. WHAT IS
NOT COVERED: 
All failures caused by
abuse, neglect, or improper maintenance are
not covered.

ADD--ON OR MODIFIED

PARTS: The use of add--on or modified parts
can be grounds for disallowing a warranty

claim. POULAN/WEED EATER is not liable
to cover failures of warranted parts caused by
the use of add--on or modified parts. HOW
TO FILE A CLAIM: 
If you have any questions
regarding your warranty rights and responsi-
bilities, you should contact your nearest au-
thorized service center or call POULAN/
WEED

EATER

at

1--800--554--6723.

WHERE TO GET WARRANTY SERVICE:
Warranty services or repairs shall be pro-
vided at all POULAN/WEED EATER service
centers. Call 1--800--554--6723. MAINTE-
NANCE, REPLACEMENT AND REPAIR
OF EMISSION RELATED PARTS: 
Any
POULAN/WEED EATER approved replace-
ment part used in the performance of any war-
ranty maintenance or repair on emission re-
lated parts will be provided without charge to
the owner if the part is under warranty. EMIS-
SION

CONTROL

WARRANTY

PARTS

LIST: Carburetor, Ignition System: Spark
Plug (covered up to maintenance schedule),
Ignition Module.

MAINTENANCE STATE-

MENT: The owner is responsible for the per-
formance of all required maintenance as de-
fined in the instruction manual.

The information on the product label indicates which standard your engine is certified.
Example: (Year) EPA Phase 1 or Phase 2 and/or CALIFORNIA.

This engine is certified to be emissions compliant for the following use:

Moderate (50 hours)

Intermediate (125 hours)

Extended (300 hours)

Summary of Contents for TWIST-N-EDGE TE400CXL












Reviews: