Page 6
902-002-11 Rev 6
Parts & Service 21/09/2015
SECTION 1:
Safety
1.2 SAFE COUPLER USE
Your I-LOCK Coupler will extend the overall length of the dipper arm.
ATTACHMENTS MAY HIT THE CABIN AND OR BOOM
Your I-LOCK Coupler may enable the operator to use buckets and attachments for which it is not
designed, i.e. oversized buckets or attachments.
ONLY USE ATTACHMENTS THAT ARE DESIGNED SPECIFICALLY FOR THE HOST MACHINE.
Never place your hands inside the coupler or anywhere near the linkage mechanism whilst the
hydraulic system is pressurized or the carrier machine is turned on.
Never use the Primary Locking Wedge or I-LOCK Safety Knuckle as a lifting device.
FOR INFORMATION RELATING TO “SAFE LIFTING PROCEDURES” REFER TO SECTION 5
OF THIS MANUAL.
Always fully engage the coupler to the bucket or attachment even if you just want to lift or move
the attachment to a different position on your work site
Any damage deemed by Wedgelock to have been caused by operator misuse will invalidate the
manufacturers warranty.
