1. Check to see all connections are made
2. Check that the pre-filter and pre-carbon sumps are secure using the housing wrench provided.
3. Slowly turn on the water by turning the needle valve counterclockwise.
4. The valve handle on top of the tank should be in the open position, parallel to the valve body
5. The handle of the faucet should be perpendicular to the spigot (closed).
6. Check for leaks.
7. The RO/NF ro drinking water system makes 2 gallons of drinking water per hour and requires
1 to 2 hours before water is readily available.
8. During this initial fill period, you will hear water being discharged through the black drain line.
This is normal as the contaminated water is being rejected by the reverse osmosis membrane.
8
START-UP PROCEDURE
DO NOT DRINK THE WATER FROM THE FIRST TANK PRODUCED BY THE SYSTEM.
DISCHARGE THE WATER FROM THE STORAGE TANK BY OPENING THE FAUCET.
DISCHARGING MIGHT TAKE UP TO 15 MINUTES.
If you have any difficulties with the installation, or require additional information on your unit,
please consult with our factory technicians.
We thank you for purchasing our Reverse Osmosis / Nanofiltration unit for your high quality processed drinking
water. In order to maintain this high quality water, it is important that scheduled maintenance be followed.
To properly maintain your WECO drinking water system, please use
only genuine WECO water replacement filters at
www.wecofilters.com
or call us at 1 (888) 675-5187
RECOMMENDED SYSTEM MAINTENANCE
TINY Manual