WELD THE WORLD
Cod. 006.0001.2000
19/07/2018 V.2.0
Discovery 221AC/DC Evo
Discovery 300AC/DC Evo
61
ENGLISH
A
○
Insert the memory stick in the USB port
○
Press the
S2
button
to enter the JOB MENU.
B
○
Use the
encoder E1
Menu
Menu
to select USB IMPORT.
○
Press the
S5
button
Menu
Menu
to confirm.
- Wait for the JOB import procedure to terminate.
-
If no valid JOB file is present, the “IMPORT FAILED” message is displayed
C
○
Exit
- Press the
S3/S4
button
.
Tab. 21 - JOB importing operation messages
MESSAGGIO
SIGNIFICATO
VERIFICHE
USB DEVICE NOT FOUND
USB device not found
- incorrectly inserted memory stick
- memory stick removed before com
-
pleting the operation
FILE NOT FOUND
File not found
- there are no JOBs loaded onto the
USB memory stick.
IMPORT FAILED
Importing procedure failed.
- USB not formatted as FAT32.
- unidentifiable generic error: re-insert
the memory stick and retry.
- the connected USB drive is damaged.
IMPORT IN PROGRESS
The JOBs saved on the USB memory
stick are being imported
IMPORT COMPLETE
Importing procedure completed
11.5 SELECTING JOBS USING THE TORCH BUTTONS
When an UP/DOWN torch is installed, JOBs can be selected in a JOB sequence using the buttons on
the welding torch. To create the JOB sequence, leave a free memory slot before and after the group of
JOBs to be included in the sequence.
To create the JOB sequence, leave a free memory slot before and after the group of JOBs to be inclu
-
ded in the sequence.
Sequence 1
JOB not
saved
Sequence 2
JOB not
saved
Sequence 3
J.01
J.02
J.03
J.05
J.06
J.07
J.09
J.10
J.11
Select and upload one of the JOBs belonging to the desired sequence (e.g. J.06) through the power
source user interface.
Use the torch buttons to scroll through the JOBs of sequence 2 (J.05, J.06, J.07).
Antwerpsesteenweg 949 9041 Gent - Oostakker
[email protected]
www.welda.be
T
+32 (0)9 355 74 26
F
+32 (0)9 355 92 01
