27
6.
1
2
3
4
5
6
7
8
9
0
%
Enter the form number on the key-pad.
The form number is the same as the number that was entered in
the tracer during the tracing process.
Range of job numberswith memory card SM200:
1 - 234
Range of job numbers with Software Optolab IV:
1 - 999999
7.
ENTER
%
Press <ENTER> key to end data entry.
The right form is displayed.
8.
1
2
3
4
5
6
7
8
9
0
%
Enter decentration data on key-pad.
The data quantity and type depends on the selected decentration
menu.
•
Press <ENTER> key to end data entry.
%
Decentration point and blank diameter are automatically
calculated and displayed.
•
Place the lens in the lens support
Note:
The lens illumination will only turn on when the lens
is located in the parallax free zone
9.
C
%
Use <C> key to correct decentration values
Note::
When the <ENTER> key is pressed longer the
change will be executed.
