<Note>
1.
When connecting to RS485 or RS422, you should connect the ground among devices.
If not, it may cause abnormal operation or damage on device.
6.3. Connecting & Setting sensor input
6.3.1. Specification
In order to run sensor input of WebEye 2.0 B101 normally, the following conditions are required.
Input Ch.
4Ch. Photo coupler differential inputs
Input type
NO / NC
Supported sensor
Dry contact
Spec.
Connecting
Connecting the trimmed wire to terminal block
Available input pulse range
Min. 500ms
Performance
Output current
Typical DC 12mA
6.3.2. Diagram of sensor input
6.3.3. Connecting
When connecting sensor 1, inset cables to 1, 2 pins (1+, 1-) as followings. Connect sensor 2~4 equally.
28
