5.1.2. Connecting to local Network
(1)
Connect WebEye 2.0 B101 to HUB with direct cable.
(2)
Connect an external camera to WebEye 2.0 B101’s video input with BNC cable.
(3)
Connect the supplied AC adaptor to WebEye 2.0 B101.
POWER SUPPLY
(SUPPLIED)
ETHERNET
(SUPPLIED)
DIRECT CABLE
TO AC OUTLET
<Note>
1.
To prevent WebEye 2.0 B101’s damage, you should connect power cable after connecting Ethernet
cable.
2.
Ethernet cable should be pushed and connected, If not, noise may be occurred.
3.
Check the LED of WebEye 2.0 B101 after supplying power.
Network status
Yellow LED
Green LED
Connected
It is on for the first 1-2 seconds,
and it blinks once per second.
Disconnected
It is on for the first 4-5 seconds and it
goes off. Then it keeps blinking fastly.
It is on for the first 1-2 seconds,
and it blinks once per 2 seconds.
16
