i-Rec B104
Installing & Connecting
16
2003. 06. 30 (v 1.4)
WEBGATE Inc.
5.3. Setting IP address
(1) Click “
Network
” Tab.
(2) Input the assigned values of “
IP Address
”, “
Network Mask
”, “
Gateway Address
” into
“
Ethernet
” menu.
(3) Click “
Apply
” button.
<Note>
1. Be careful on typing values into this menu. Without correct network address, nobody will
be able to connect to i-Rec B104.
2. Refer to the User’s guide in setup CD-ROM to install i-RecB104 on Dynamic IP network
environment.
3. If a network firewall is installed, change the port number at “
Port Assignment
”.
