13
Op
er
at
ion
F
G
H
Setting a Grill Temperature Notification
Please follow these steps for setting a notification to
alert you when your grill has reached a target internal
temperature:
1) Push any button located on the temperature
controller to turn ON the WEBER CONNECT module.
2) Push the BELL button to activate grill temperature
notification.
3) While the display is blinking, push the + or -
buttons to set the target grill temperature. Push the
CHECKMARK button to confirm your selection.
4) Reapeat steps 2 and 3 to update or set a new target
temperature.
5) Once the grill reaches the target temperature, the
BELL button will blink, the controller will ding, and
if using the WEBER CONNECT app, you will receive
a push notification on your smart device.
6) All of these WEBER CONNECT module functions can
also be set wirelessly via Wi-fi or Bluetooth® from
the WEBER CONNECT app on your smart device.
Grilling with Food Temperature Probes
Use the included food temperature probe to monitor
your WEBER grill for the perfect food, every time.
Please follow these steps for using food temperature
probes:
1) Once the grill has been preheated, open the grill lid
and clean the cooking grates using a grill brush or
scraper, then set the control knobs to the desired
grill temperature.
2) Place your food on the grates.
3) Plug the food temperature probe(s) into the ports
of the WEBER CONNECT module
(F)
and, using
heat resistant grill mitts or gloves, route food
temperature probe cables through the side channel
on the grill
(G)
.
4) Insert food probe(s) into the center of the thickest
part of your food.
5) Close the grill lid.
6) Push any button located on the temperature
controller to turn ON the WEBER CONNECT module.
7) Push the BELL button to navigate between grill
temperature and food temperature probes 1 and 2.
8) Once you select which probe you are using,
push the + or - buttons to set the target food
temperature. Push the CHECKMARK button to
confirm your selection.
9) Reapeat steps 7 and 8 to update or set a new target
temperature.
10) Once the probe reaches the target temperature,
the BELL button will blink, the controller will ding,
and if using the WEBER CONNECT app, you will
receive a push notification on your smart device.
11) All of these WEBER CONNECT module functions can
also be set wirelessly via Wi-fi or Bluetooth® from
the WEBER CONNECT app on your smart device.
m
WARNING
m
Risk of injury! The food temperature probes
are very sharp. Please be careful when
handling probes.
m
Risk of burns! Handling the food temperature
probes without hand protection will result in
severe burns. The colored probe indicators
are not intended to be touched with bare
hands while using the grill as they are not
heat-insulated. Please wear heat-resistant
gloves at all times while using this product in
order to avoid being burned.
Food Temperature Probe Care
Cleaning the Food Temperature Probe
Clean probe before first use. The probe should be
cleaned by wiping with water and a damp cloth.
The food temperature probes are not dishwasher
safe or waterproof and damage may result from
excessive water exposure. Never submerge the
probes directly in water or other liquids.
Storing Food Temperature Probe
Once cleaned, neatly wrap the probe when not in
use and store indoors.
Summary of Contents for SPIRIT EX-315 LP
