22
3
1
1
2
1
2
3
1
maINTENaNcE
4
5
side Burner MaintenanCe
m
warninG: all gas controls and supply valves should be in
the off position.
Make sure black wire is connected between the igniter and electrode .
Make sure white wire is connected between the igniter and grounding clip .
Spark should be a white/blue color, not yellow .
A) Igniter Wire
(1)
B) Ground wire
(2)
C) Burner
(3)
m
warninG: the side burner orifice (4) must be parallel to the
side burner tube opening (5).
◆
side Burner Grate
head retention Clip
side Burner ring & head
igniter electrode
Control Knob
igniter Button
eLeCtroniC CrossoVer
®
iGnition sYsteM oPerations
If the Electronic Crossover
®
Ignition System fails to ignite the BURNER 1, light BURNER
1 with a match . If BURNER 1 lights with a match, then check the Electronic Ignition .
• Check that both of the ignition wires are attached at the igniter module properly.
• Check that the Electronic Ignition button is working by listening and looking for sparks
at BURNER 1 .
replace Battery if necessary
AAA alkaline battery only.
if the electronic Crossover
®
ignition system still fails to light, contact the
Customer service representative in your area using the contact information on
our web site. Log onto www.weber.com
®
.
◆