7
(1)
(2)
(3)
ASSEMBLE FRAME HANDLE
You will need: Frame assembly, frame handle, four 1/4-20 x 1 3/4 inch bolts, eight nylon washers,
four 1/4-20 hex nuts, 7/16 inch open-end or an adjustable wrench and pliers.
Hold frame handle
(1)
between caster legs. Place a washer
(2)
on bolt
(3)
, insert through frame
assembly, then through frame handle. Add washer
(2)
, hex nut
(4)
and tighten.
4
5
(1)
(3)
(2)
(2)
(4)
INSTALL ASH CATCHER AND ALUMINUM TUBING PLUGS
You will need: Ash catcher, four aluminum tubing plugs and a hammer.
Set ash catcher
(1)
on the four vertical supports
(2)
in center of frame assembly. Insert aluminum
tubing plugs
(3)
into top ends of frame legs. To fully seat the plugs, you may have to tap them lightly
with a hammer.
ASSEMBLY
