- 3 -
Safety instructions
Read all safety and technical instructions for this machine before installing, connecting and
operating the machine.
The machine is manufactured in compliance with the ISO 9000 regulations. The design
takes into account the requirements of excellent quality and user-friendliness.
The operating instructions contain all relevant information for the machine.
Keep this manual in a safe place for future use.
The wheel balancer must not be installed in an extremely hot or cold environment. Do not
place the machine too close to radiators, gas taps, water taps, humidifiers, air conditioners
or other hazardous equipment.
The wheel balancer must not be permanently exposed to direct sunlight.
Avoid liquids entering the display. Do not place liquid containers on the weight
compartments or in the immediate vicinity of the display.
The machine must not be brought into contact with corrosive liquids and other substances
that are harmful to its surface.
The unit must be installed on a flat, load-bearing surface. It must be ensured that floor
vibrations caused by other devices or other influences are excluded.
Only properly trained and qualified personnel should use this machine. Modifications and
alterations to the machine that have not been authorised by the manufacturer can result in
considerable damage to property as well as personal injury. The manufacturer/supplier
accepts no liability for this.
Attention:
This machine must only be used for the purpose for which it was designed by the
manufacturer. Any other use is not permitted.
Weber GmbH is not liable for damages caused by improper use and abuse.
Unauthorised interventions or modifications to the machine are not permitted.
Safety