Structure and function | 25
4.6
Changing the spreader tips
The spreader tips are secured in the spreader arms with removable collar studs (with the
exception of the SP 35 AS and the SP 53 BS). In order to change, press out the studs secured
by a spring-loaded ball. After changing the tips, push the collar studs back in again. When
doing this ensure that the studs are correctly fitted (completely pressed in).
Fitting the bracket for the chain set is identical. The chain lock must be fitted with the lock
facing upwards.
The collar studs on the SP 53 spreader tips can be pressed out of the spreader arms but have a
safety system to prevent them being lost and so they cannot be separated from the tips.
The SP 35 AS spreader tips are not secured with removable collar studs but rather with a
tensioning pin that must be knocked out when the tips are being changed. The chain set can be
fastened in a separate hole without having to remove the tips beforehand.
Summary of Contents for SP 35 AS
