40 | Installation and commissioning
8.2
Checks
Check the power unit for damage. If the equipment should be found not to be in flawless
condition then it must not be used! In this event, inform your supplier immediately.
•
Check the frame (damage)
•
Check the control lever (function)
•
Check the couplings (damage, dirt)
•
Check the reels and carry handles (securely fastened)
•
Check the protective covers (damage)
•
Check the hoses (damage)
8.3
Installation
Reel brake
Each rapid deployment reel is equipped with a separate reel brake.
The brake force can be set by the nut (SW 13) in the middle of the
reel mount.
Turn clockwise = increase brake force
Turn anti-clockwise = decrease brake force
Filling with petrol
In the case of power units that have a combustion engine (V power units), it is first necessary to
fill the petrol tank. Observe the manufacturer‘s operating instructions for this!
Moving the electrical engine
In all power units with electrical engines it is possible to move
these engines backwards by up to 25 mm. This results in a
greater clearance between the reel and the tank. (Fastening via
four bolts in pre-drilled elongated holes)
The rescue equipment can now be connected (as described in
chapter 4.4).
Summary of Contents for AKKUPAC ECO
