Servicing | 41
Adjusting the device holder (E/V 70 W-SAH 20, E/V 70 W-SAH 20 COAX)
These units are delivered with a directly integrated device
holder. To optimally adjust this for the tools used, the supports
must be shifted accordingly. On page 47 of appendix, you will
find a drawing of a sample setting for the three main spreaders
and cutting devices.
For all other tools, the setting of the supports may vary slightly
or can be adjusted to the conditions on site.
To move the supports, each one’s screw must be removed and installed in a different
fastening hole. For long tools, extension plates are also available, which can simply be left off
for short devices.
Adjusting the device holder (E/V 50 T-SAH 20, E/V 50 T-SAH 15 COAX)
For these units, the device holder can be purchased as an optional extension. Instructions for
adjusting the device holder on the tools used are packed separately with the device holder.
8.4
Shutting down (end of work)
Once the work is complete return the control lever to the „0“ position and switch the machine
off via the main switch.
Summary of Contents for AKKUPAC ECO
