POSSIBLE APPLICATIONS | 35
ATTENTION !
It is necessary to ensure that the lock has latched into the bracket securely.
ATTENTION !
Store the pulling chains with the chain locks fitted approx. 10 - 20 cm from
the end. Check the chains before each use. Check that the weight does not
load the point of the hook but rather lies in the middle of the hook.
»
Do not make any repairs on your own.
»
Do not stress the chains beyond the permitted load carrying
capacity.
»
Do not load with a jerking movement.
»
Do not galvanize or paint the chains.
»
Do not shorten the chain by knotting it.
»
Do not subject the chains to heat stress.
»
Use the chains and accessories only between
–40°C and +200°C.
»
During all maintenance work, observe the applicable
German accident prevention regulations (UVV) as well as the
specifications of DIN EN 818-7 and DIN 685-5.
»
Chains must only be used for lashing. Lifting loads is not
permitted.
Chains must not be used if:
»
Deformations, cracks, signs of corrosion are present.
»
The wire diameter of the chain link has decreased by 10%
of the nominal thickness.
»
An individual chain link has been permanently stretched.
»
An individual link has been enlarged by more than 2%.
»
The internal chain pitch over a measuring distance of
11 chain links has increased by more than 2%.
