14
SRV 600i
1
1
1
Shutting down
Bring the gas lever to the “min.” (1) lock-in position.
To switch the engine off, move the short circuit button to
position (0/OFF).
Tamping
Bring the gas lever into full-throttle lock-in position.
Close the fuel cock (1).
Compacting is only permissible at the full throttle gas
lever position as there is an increase level of wear in
the slip range of the centrifugal clutch.
At obstructions (walls, pits, etc.) ensure that no one can
be caught between the machine and the obstruction;
or ensure that the machine does not slip into the pit.
Do not switch off the engine under full load; let engine
run idle for a few minutes.
Only run machine within reach of the manual guid-
ance rod (1).
Unauthorized persons are forbidden from being in the
area of the tamper during the compacting process.
During breaks – even if they are short – the machine
must be shut down.
Parked devices that represent an obstacle must be
safeguarded against through conspicuous measures.
