5
Additional safety instructions regarding the use of the battery (accessories)
The tamper SRE 300 is intended to be used with the type 1200 / 1500 battery
made by Pellenc. The battery is not included with the tamper.
Operation with the battery requires that the operating manual included by
manufacturer Pellenc be observed.
Included with the Pellenc battery are:
–
Device battery, type 1200/1500
– Charger
–
Carrying system (special accessory)
–
Operating manual
The correct and proper use of the battery in accordance with the operating manual
provided by battery manufacturer Pellenc is the sole responsibility of the owner.
Safety instructions on how to use the tamper SRE 300 with batteries
–
Never modify in any way the plug connection of the connecting cables – neither on
the tamper nor on the batteries.
–
Never use the cable for carrying, pulling or unplugging the device.
–
Protect the cable from heat, lubricants, sharp edges or moving parts.
–
In case of damage to the connecting cable of the tamper or the connecting cable of
the battery, the damage must be rectified immediately by an authorized specialist.
Operation with damaged connecting cables is prohibited.
–
Refrain from inserting such metal objects as paper clips, keys, nails, screws or
other small metal parts into the electric motor, the case housing of the electronics
or the battery as they may cause a short circuit.
–
The tamper, the case housing the electronics and the battery must not be immersed
in water.
Easily foreseeable misuse
Any use for which the machine is not intended.
