4
Introduction
This operating and maintenance manual is designed to facilitate familiarization with your
tamper, and enable you to maintain the tamper and use it in accordance with the proper
application possibilities.
When complying with the instructions in the operating and maintenance manual you help
avoid hazards, reduce repair and downtime costs, and increase the reliability and service
life of your tamper.
This operating and maintenance manual must always be available at the implementation
site of the tamper.
If necessary, you can obtain additional information from your authorized WEBER dealer,
or you can obtain information from one of the contact addresses on the last page.
The valid conformity declaration is enclosed with every machine delivery.
For information on the battery used, log on to
www.pellenc.com
Safety guidelines
General
All safety instructions must be read and complied with, non-compliance results in
– Danger to life and limb of the user
– Impairments to the machine or other property.
In addition to the operating manual, the accident-prevention regulations in the country
where the appliance is used must be complied with.
Intended use
The tamper should only be used in technically faultless condition, as intended, in a safety-
conscious and hazard-conscious manner, in compliance with the instructions in the
operating manual. Malfunctions that impair safety must be eliminated without delay.
The SRE 300 tamper is designed exclusively for compacting
– Sand
– Gravel
– Crushed rock
– Semi-cohesive mixed material.
Any other use of the tamper is considered to be improper use for which the owner shall
be exclusively responsible. All liability is rejected if damage occurs due to non-compliance
with this provision. This risk is borne solely by the user.
