Webb 1938123001, Operators Manual & Parts Lists

Page: 10 / 36

HANDLE ASSEMBLY
§
Rotate the lower handle up away from the lawnmower deck, ensuring the electrical cables are
not trapped or crimped. (See fig. 2)
§
Ensure the Electric Cables run down the outside of the handle assembly.
§
With the handles in line with the Lower Quick Release Handle, secure, by folding the Quick
Release Handle upwards to secure. Repeat on both sides. (See fig. 3)
§
Secure the Upper & Lower Handle. (See fig. 4 &5) Select the required height for the user and
secure, ensure the handle assembly is straight and in line with each other.
§
Secure the Electric Cable to the handle assembly, using the Cable Clips provided. (See fig. 6). The
2
ASSEMBLY
ASSEMBLY/PRE-OPERATION
Read these instructions in its entirety before you attempt to assemble and operate your new
lawnmower.
REMOVE LAWN MOWER FROM CARTON
Roll the lawn mower out of the carton and check thoroughly for additional loose parts. Please ensure
that you have all the below necessary parts, before commencing with the assembly. In the unlikely
event that you are missing a component, please do contact us on 01793 333212, option 2 or email
customerservice@handydistribution.co.uk for assistance.
x1 x1
x1 x2
INSTRUCTION MANUAL