Suzuki Splash
1314128B_EN
20
Coolant circuit
WARNING!
Any coolant running off should be collected using an appropriate container. Install hoses so that they
are kink-free. Unless specified otherwise, always fasten using cable ties. Position clamps so that no
other hose can be damaged! When installing the hoses, the heater must be filled with coolant.
The connection should be "inline" based on the following diagram:
Hose rout-
ing dia-
gram
All spring clips
= 27 mm dia.! All hose clamps
= 20-27 mm dia.!
All connecting pipes
= 20x20 mm dia.
1
= Black (sw) rubber isolator
[2x with manual transmission, 1x with automatic transmission]!
2
= Black (sw) rubber isolator
, all vehicles!
A
B
C
D
1
1
2
