Webasto Sprinter Vancouver Standard, Manual

Page: 26 / 32

26
Vancouver Sprinter
15. Install the straight #6 fittings (21, 22) on the
refrigerant valve.
16.Using the 90º fittings (24, 25), install the low-
and high-pressure A/C hoses (11, 12) to the
Vancouver assembly. After orienting the
fittings, install the TXV plate (18).
NOTE: The magnet will click into place when
properly installed.
17.Connect the high-pressure hose to the
refrigerant valve. Route both hoses along the
roof line and through the hole in the floor.
Install the magnet and connect the electrical
connector.