manualshive.com logo in svg

Web Mountain Technologies RUC-01, User Manual, Page: 72 / 100

Share
Download
Web Mountain Technologies RUC-01 User Manual Download Page 72

Web Mountain Technologies 

Page 66 

 

 
 

Chapter 5

 

Home Automation 

 
 
 
The RUC can also be used as an Ethernet PIM for intelligent controller  

applications.  In order to do this, UPB commands will need to be 
sent over the LAN.  There are multiple ways of doing this – here 
are three examples: 

 

I.

 

HTTP POST Command 

The controller will need to issue a HTTP POST command.  This 
process is described in this URL: 
 

http://souptonuts.sourceforge.net/code/http_post.c.html

 

 
In this process, in the main(void) function, you will need to 
change: 
 
char *hname = "wmtruc" 
char *page = "upbtrans.htm" 
char *poststr = "command=87000101FF2058" 
 
This is a C++ example.  Your language might be different, but 
most languages will have a mechanism to generate a HTTP POST 
command. 
 
 
 

II.

 

 Use telnet. 

telnet <IP Address:9761> <Control-T>

 87000101FF2058<CR> 

 

 

III.

 

Create a client based program

 in C or other language that 

will “talk” to the RUC on port 9761.  For examples of this, 
contact Web Mountain Tech Support. 

 

 

 

 
 

Summary of Contents for RUC-01





































































































Reviews:

No comments