Web Mountain Technologies RUC-01, User Manual, Page: 25 / 100

Web Mountain Technologies Page 19

To change the Admin password (you can’t change the user name), enter
the old password, then your new desired password twice. Then, click the
Set New Password button.

If you as the administrator want to reset the base user parameters back
to default, click on the Reset Base User Credentials button. This sets the
base user back to wmtruc/password.

You will notice that there is a Reboot Device button on this page. If for
some reason, the user believes they need to reboot the device, but they
aren’t local to the device, then the user can access this webpage remotely
and reboot the device. This will act just like a power cycle. NOTE – if the
unit is configured for DHCP, with some routers, the device might acquire
a new IP address.

Enter in the Owner’s contact information. Once entered, this
information will only be visible to the Admin user on the Admin page (not
shown on any other page), and provides confirmation to a user accessing
the unit remotely as to what unit is actually being accessed.

An installer can enter in his contact information in the Installer fields
and this information will show up on the Home Page as the contact for
Support.

Once you have made all of your changes, click on the Register button.
At the moment, this information is only stored locally on the RUC unit,
however, at some point in the future, this will be sent to Web Mountain
for registration purposes.