Page 3
IMPORTANT SAFETY INSTRUCTIONS cont.
z
Always remove the plug from the wall socket after use in case of malfunction, or before cleaning.
z
When removing the plug from the wall socket, never pull on the power cord.
z
Children do not recognise the dangers that may occur when operating electrical appliances; therefore keep children
away from such appliances.
z
Do not attempt to remove any parts of the housing nor insert any metal objects into the interior of the appliance.
z
To prevent damage to the power cord, do not let it pass over sharp corners or edges.
z
Do not expose the appliance to rain or moisture and do not operate the appliance outdoors or with wet hands.
z
Use only clean cold water.
z
The appliance operates at very high temperatures, Caution: there is danger of scalding from escaping water or steam.
z
Do not touch any part of the kettle except the handle (when the appliance is in use and ensure that the lid is properly
secured. This appliance is designed for heating water only. Never put any other liquid into the kettle.
OPERATING GUIDELINES
Before using your kettle:
z
Fill kettle with water to the maximum level, boil and discard water. Repeat three {3} times.
Using your kettle:
1. Place base (4) on a firm and level surface.
2. Pour the desired amount of clean water into the kettle (2) and ensure that the lid (5) is closed. Do not touch any part
of the kettle except the handle (8) when the appliance is in use. The amount of water can be measured by the level
mark (7) on the outside of the kettle, always pay attention to the minimum and maximum levels.
3. Place the kettle on the base (4) and connect the plug into a power outlet. Turn power on. Press the on/off switch (6) to
its ‘ON’ position. The indicator lamp (3) will light up indicating that the boiling process has begun.
4. Once the kettle is boiled the on/off switch (6) will return automatically to the OFF position and the indicator lamp (3)
will go out. The water kettle can also be switched off manually by flicking the on/off switch to the OFF position.
5. Lift the kettle from the base and pour the water through the spout.
NOTE:
This kettle is equipped with a safety cut –out to protect the appliance from damage. Should the appliance be
accidentally operated without water or if all the water has evaporated the safety cut out will automatically switch
off the heating element. In such a case remove the plug from the wall socket immediately and refill the kettle only
after an adequate cooling down period, about 15-20 seconds.
