Page 10 of 34
Weatherdock AG
2.1.
Activating elements
2.1.1.
Button "ON"
Pressing the button „ON“ the easyRESCUE-DivePro enters the
'Identification" mode (transmitting locating object's
position).
If this button is pressed again for 3 seconds, the normal mode
will be terminated and the device is turned off.
2.1.2.
Button "ALERT"
With the button "ALERT“ the device can be activated in case
of emergency. AIS-SART messages cause an alarm at the
receiver side (i.e. shore base station or mobile ship station).
The “ALERT” mode can be terminated by pressing the BOTH
button for 3 seconds. The easyRESCUE-DivePro switches
totally off then.
2.2.
Indicators
2.2.1.
GPS LED
The green LED with the marking „GPS“ is blinking, when the
device receives GPS signals and is able to get a position fix. If
the GPS LED does not blink, there is not GPS reception
possible.
2.2.2.
ON LED
The yellow LED with the marking „ON" is blinking, when the
easyRESCUE-DivePro is activated in case of identification
(transmitting locating object's position and additional status
information).
