background image

PAGE 2

IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT US TOLL-FREE AT .800.456.7865

24-0245 REV. A 07/06

This LIMITED WARRANTY is made by Knaack Manufacturing Company, 420 E. Terra Cotta Ave., Crystal Lake, Illinois to the original retail purchaser 
of KNAACK

®

 Products.

KNAACK MANUFACTURING COMPANY WARRANTS THAT KNAACK PRODUCTS WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP 
FOR A PERIOD OF THREE (3) YEARS FROM DATE OF PURCHASE BY THE ORIGINAL RETAIL PURCHASER.

If, before the expiration of the Warranty period, purchaser discovers that the KNAACK Product fails to fulfill the Warranty, purchaser shall contact Knaack 
Manufacturing Company to make arrangements for an inspection of the product.  If Knaack Mfg. Co. determines a defect exists, Knaack Mfg. Co. shall, 
at its option and expense, repair or replace any defective part.  All Warranty repairs shall be made by an authorized KNAACK Product dealer or Knaack 
Mfg. Co. approved service company.

This Warranty shall not apply if the KNAACK Product has been subjected to misuse, abnormal service or handling, improper maintenance, or alterations 
made by anyone other than a KNAACK Product dealer or a Knaack Mfg. Co. approved service company.

THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL OTHER WARRANTIES, EXPRESS OR 
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
ARE HEREBY DISCLAIMED.

KNAACK MANUFACTURING COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF 
ANY BREACH OF THIS WARRANTY. NOR SHALL THE DAMAGES EXCEED THE RETURN AMOUNT OF THE PURCHASE PRICE PAID BY THE 
ORIGINAL PURCHASER.

This Warranty is in lieu of all Warranties express or implied. The terms of this Warranty shall not be modified by any party, their successors or assigns. 
This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

KNAACK MANUFACTURING COMPANY LIMITED WARRANTY

NOTE:  Depending on your application you may end up  

with extra hardware after installation is complete.

DESCRIPTION

BOLT KIT #32-062

QTY.  

BOLT KIT #32-063

QTY.  

BOLT KIT #32-083

QTY.  

Mounting Straps 

3

3

3

Mounting Strap Angles

3

3

3

1/4" Lock Washers

4

4

4

1/4-20 Blind Fasteners

4

4

4

1/4-20 x 5/8" Hex Head Bolts 

10

10

10

1/4-20 Serrated Nuts 

12

12

0

1/4-20 x 3/4" Hex Head Bolts

7

13

7

1/4-20 x 1-1/4" Hex Head Bolts

4

6

4

1/4-20 x 1/2" Hex Head Screws

12

12

0

1/4-20 Nylon Lock Nuts

18

26

18

1/4" Flat Washers 

18

22

18

Floor Mounting Spacers

4

6

4

Blind Fastener Installation Tool

1

1

1

1/4-20 x 2-1/4" Hex Head Black Bolt

1

1

1

Summary of Contents for JUMBO VAN SHELVING







Reviews: