background image

3

Installation

The product must be installed and maintained by a 

VXLWDEO\TXDOLƂHGSURIHVVLRQDOLQFRPSOLDQFHZLWKODWHVW

 

building/construction and/or electrical regulations and 

relevant legislation.

Warning:

 Switch off mains electrical supply prior to 

installing and connecting the luminaire.

Notice:

,IWKHOXPLQDLUHLVPRGLƂHGE\DQ\ERG\RWKHU

than the original manufacturer, then the warranty will 

no longer be valid and shall become the full respon-

sibility of the modifying person/organisation. Claims 

based on defects attributable to improper installation 

and/or application, and the consequences thereof, are 

excluded.

Installation Procedure

1)  Switch off the mains electrical supply.

2)  Check that rating shown on luminaire label  

conforms with mains electrical supply.

3)  Attach supplied mounting bracket 

E

 to the spigot by 

means of set screws 

B

, and lock in desired position.

4) Feed cable 

A

 through bracket 

E

 and pole.

5)  Attach luminaire to the mounting bracket 

E

 by 

means of set screws 

C

6)  Adjust the orientation of the bracket by loosening 

set screws 

B

. After the correct orientation has been 

set, retighten the set screws.

7)  Trim the cable 

A

 to the desired length and connect 

the leads to their respective terminals at the base of 

the pole: (L = Phase, N = Neutral,   = Earthing).

Reviews: