UP35-4481N26000-02/15
– REV.B1
Page 53 / 63
7.5
Mounting adapter into the machine
DANGER
+
Due to the risk of hand or finger injury, never try to reach into the machine before having
assured that the machine is disconnected from the air supply. Disconnect the air supply
before changing the safety guard, the adapter and the dies.
CAUTION
+
The crimp machine is only allowed to be used with mounted dies, die adapter and the
suitable safety guard. Pay attention to the correct assignment of adapter to safety guard.
+
The crimp machine is only allowed to be used when it is in a completely functional
condition.
+
Before commissioning the machine, it is always important to check whether all safety
devices, especially the safety guards and die adapter, are installed and are functioning
correctly.
+
When working with the pneumatic Parallel Crimp Machine UP 35, do not wear loose
clothing, jewellery or long, loose hair that can get caught in the pneumatic Parallel Crimp
Machine UP 35.
+
Work with caution.
+
Only one person is allowed to work on or with the machine at a time.
+
Only trained personal are allowed to work on or with the machine.
+
Assure free access to the operating elements of the machine, especially the foot pedal
and the release button. In the case of imminent danger immediately press the release
button. The release button must be within the direct reach of the operator. It must not be
covered.
+
It is only allowed to work with the specified air pressure.
+
Disconnect pneumatic supply.
+
Press the locking device
1
downwards
and hold it.
+
Insert the die adapter
2
with mounted
safety guard into the adapter reception of
the machine. This process has to be
executed
smoothly
(without
force),
otherwise the danger of canting will arise.
+
Release locking device
1
.
+
If necessary move the die adapter
2
back
and forth, so that the locking device
1
can lock in place.
1
2
Fig. 7.8
