Operation manual Soldos - SL (04-09) page 13 of 18
7. Disinfection instruction
The disinfection has to be done at every exchange of the brine bag,
at least monthly (Before the initial operation, the disinfection has
to be done as well)
The disinfection has to be done preferably before or after the
operation when no bathers are in the room!
A disinfection tablette is always included in delivery!
Disinfection:
Step 1:
Wash out the empty politainer by drinking water, fill up the
measuring bottle (200 ml) by cleaned water und add one tablet.
Lock up the measuring bottle and shake it until the tablet is
solubilized.
Step 2:
Fill in the brine solution into the empty, cleaned politainer and draw up the
politainer again.
Step 3:
Draw up the nozzle adaptor on the nozzle in the room (PVC
compact with PE downpipe hose) in order to receive the
disinfection and brine solution. By using the downpipe hose,
pipe the solution directly into the gully if possible.
This is to avoid that the solutions are atomized within the
room.
Step 3.1
Before starting the disinfection, the dosing performance of
the hose pump has to be upgraded to the highest
performance in order to assure a complete fllling of
the hose pipe.
Step 4:
Switch on the programme „disinfection“. The pump is
dosing the solution for 4 minutes now. Within this time,
all parts are filled with disinfection solution. Afterwards,
the Soldos is disabled for 11 minutes, in order to provide
the disinfection solution enough residence time.
Meanwhile, the LED for both disinfection and flushing is
lighting.
