OP
ER
A
TI
ON
Manually apply tension to the tail end of the rope and depress the footswitch to begin
pulling.
Unload the footswitch and ensure footswitch cable is as straight as possible and untangled to
Unload the footswitch and ensure footswitch cable is as straight as possible and untangled to
Unload the footswitch and ensure footswitch cable is as straight as possible and untangled to
Unload the footswitch and ensure footswitch cable is as straight as possible and untangled to
prevent the cable from binding inside.
prevent the cable from binding inside.
prevent the cable from binding inside.
prevent the cable from binding inside. Stand at least 30° to either side of the pulling rope while
Stand at least 30° to either side of the pulling rope while
Stand at least 30° to either side of the pulling rope while
Stand at least 30° to either side of the pulling rope while
under load. The pulling rope may fail under tension and release stored energy. Failure to do so
under load. The pulling rope may fail under tension and release stored energy. Failure to do so
under load. The pulling rope may fail under tension and release stored energy. Failure to do so
under load. The pulling rope may fail under tension and release stored energy. Failure to do so
may result in death or serious injury.
may result in death or serious injury.
may result in death or serious injury.
may result in death or serious injury.
8
15
Plug the TUF-Lugger™
into a 120 V, 15 A grounded outlet or extension cord.
14
Use only a three prong grounded extension cord with the proper wire size for the length of cord.
Use only a three prong grounded extension cord with the proper wire size for the length of cord.
Use only a three prong grounded extension cord with the proper wire size for the length of cord.
Use only a three prong grounded extension cord with the proper wire size for the length of cord.
For lengths less than 50ft, use a 14Ga cord as a minimum. Lengths from 50
For lengths less than 50ft, use a 14Ga cord as a minimum. Lengths from 50
For lengths less than 50ft, use a 14Ga cord as a minimum. Lengths from 50
For lengths less than 50ft, use a 14Ga cord as a minimum. Lengths from 50----100ft,
100ft,
100ft,
100ft, use a 12 Ga
use a 12 Ga
use a 12 Ga
use a 12 Ga
cord as a minimum. Failure to do so may result in overheating and damage to the
cord as a minimum. Failure to do so may result in overheating and damage to the
cord as a minimum. Failure to do so may result in overheating and damage to the
cord as a minimum. Failure to do so may result in overheating and damage to the electric motor.
electric motor.
electric motor.
electric motor.
Read all electrical safety instructions located on the first page of this manual before using th
Read all electrical safety instructions located on the first page of this manual before using th
Read all electrical safety instructions located on the first page of this manual before using th
Read all electrical safety instructions located on the first page of this manual before using the
e
e
e
TUF
TUF
TUF
TUF----Lugger
Lugger
Lugger
Lugger
. Failure to do say may result in serious injury or death.
. Failure to do say may result in serious injury or death.
. Failure to do say may result in serious injury or death.
. Failure to do say may result in serious injury or death.
Wrap rope around capstan and ensure shaft support pin is in place
13
Remove the support pin and wrap the rope around the capstan in a counter clockwise direction
Remove the support pin and wrap the rope around the capstan in a counter clockwise direction
Remove the support pin and wrap the rope around the capstan in a counter clockwise direction
Remove the support pin and wrap the rope around the capstan in a counter clockwise direction
as shown and around the rope guide.
as shown and around the rope guide.
as shown and around the rope guide.
as shown and around the rope guide.
Important: Replace the shaft support pin and quick releas
Important: Replace the shaft support pin and quick releas
Important: Replace the shaft support pin and quick releas
Important: Replace the shaft support pin and quick release pin prior to use. Failure to do so will
e pin prior to use. Failure to do so will
e pin prior to use. Failure to do so will
e pin prior to use. Failure to do so will
cause damage to the machine
cause damage to the machine
cause damage to the machine
cause damage to the machine
