C
hapter 5 >> Main Menu
27
User Interface
1
Select
User Interface
using the
Arrow (▲/▼)
buttons on the menu and press the
OK
button.
2
Select a setting using the
Arrow (▲/▼)
buttons and press
Configuration
the
OK
button.
Available settings are listed below:
(1)
Instant Timeshift:
If you enable the instant timeshift,
the timeshift function will operate automatically.
(2)
PVR Start Margin:
This setting adjusts all scheduled
recordings to start earlier.
(Disabled, 1, 2, 5, or 10 minutes)
(3)
PVR End Margin:
The time that is automatically added
to each recording after the program is expected to end.
(Disabled, 5, 10, 15, 20, or 30 minutes)
(4)
Autodelete Oldest Recordings:
If you enable this setting, the oldest recording in each
keyword recording will be automatically removed when its quota is exceeded.
(5)
Default PVR Quota:
This setting defines a default disk space quota for new keyword
recordings.(10GB, 20GB, 50GB, 100GB, 200GB, 500GB or Unlimited)
(6)
Screensaver Timeout:
If you don’t take any action, the screensaver screen will be
displayed after this timeout setting. (Disabled, 5, 10, or 15 minutes)
(7)
OSD/Banner Display Time:
When the OSD/Banner is shown it will be hidden after this
display time setting. (2, 5, 10, and 15 seconds)
System Settings
1
Select
System Setting
using the
Arrow (▲/▼)
buttons on the
Configuration
menu and
press the
OK
button.
2
Select an action using the
Arrow (▲/▼)
buttons and press
the
OK
button. Available actions are listed below:
(1)
Restart Device:
If you select Restart device and press
the OK button, the STB will reboot itself.
(2)
Restore Factory Default:
Reset back to the factory
default settings. PIN input is needed to execute this
action.
System information
1
Select
System information
using the
Arrow (▲/▼)
buttons on the
Configuration
menu and
press the
OK
button.
2
Select a setting using the
Arrow (▲/▼)
buttons and press
the
OK
button. Available settings are listed below:
(1)
IP Network:
Ethernet status, DNS1 and DNS2 can be
viewed with this option.
(2)
Software:
Firmware version, and Software Update
Check can be viewed with this
option.
(3)
Chip id:
Chip id of the device for chipset pairing.
M_180_DNA_HD-T63CX_ENG_120322_jte.indd 27
2012-03-22 �� 2:41:28
Summary of Contents for HD2s
Page 1: ......
