background image

Shenzhen Waytronic Electronics Co., Ltd.

MicroSound V3.11

- 5 -

delay phenomenon. What happened?

Answer: After power on, there will be 5-20 seconds of power initialization. During this period, it is normal to have
no response or slow reaction. After this time it will work normally.

Question 4: When updating audio, sometimes it needs to wait for a long time. What is the problem?

Answer: This may be because in the last time, it hasn't finished updating before the power off or because the
external power supply is not stable, causing the FLASH file error or damaged. Thus, when updating audio again
with power on, it will repair the FLASH file, so the time is a little longer.

Indemnification

SHENZHEN WAYTRONIC ELECTRONIC CO.,LTD. reserves the right to modify and use information without

prior notice to customers. New product specifications will be subject to the latest version

Contact Us

Shenzhen Waytronic Electronics Co., Ltd.

Tel: +86-755-29605099

Fax : +86-755-29606626

Website:

en.waytronic.com

E-mail:

[email protected]

Add:4/F,Building No.11,Fuan Robotics Industrial Park, Fuyong,Baoan

District,Shenzhen ,518103,Guangdong ,China

Summary of Contents for MicroSound M13






Reviews: