11
MAIN MENU
MAIN MENU
2. Installation
2.1 Auto Scan
In FTA Only, press [Left/Right] key to choose Yes or
No.
Move the highlight on the search option, and press
[OK] key to start scanning.
Press [EXIT] key to exit this menu.
When you enter Auto Scan menu, the screen will display as below.
2.2 Channel Scan
When you enter
Channel Scan
, the screen will
display as beside.
There are two scan modes for you. You can choose to
scan by channel or by frequency.
When scan band is UHF and region is
“
China
”
, the
range of Ch Number is from 13 to 61. When scan
band is VHF and region is
“
China
”
, the range of Ch
Number is from 1 to 12. (It
’
s according to region.)
When you complete your configuration, move highlight to
search
option, and press
[OK] key to start scanning.
Press [EXIT] key to exit the scanning and save the current parameters.
2.3 Aerial Adjustment
When you enter Antenna feeding, the screen will
display as beside.
In CH No. submenu, press [Left/Right] key to choose
the channel.
1. Press
PR+, PR-
keys to move the cursor up or down.
2. Press
EXIT
key or key to move the focus to the
left menu.
In Tuner Power submenu, press [Left/Right] key to
choose Off and On.
2.4 LCN
Press [Left/Right] key to choose On and Off.
