wayscral TAKEAWAY E-200, Original Instructions Manual

Page: 56 / 356

56
EN
manual pressure, it means that it is not sufficiently tightened. The
adjustment nut must therefore be tightened
without the use of tools .
3. Folding of the stem and adjustment of the seat using the quick-
release clamp
WARNING: the quick release systems are designed to be operated by
hand. Never use tools to block or unblock the mechanism to avoid
damaging it. To adjust the clamping force, you must use the
adjustment nut (2) located opposite the lever (1) and not turn the quick-
release lever.
To lock or unlock the system, open the adjustment lever (1) and turn
the adjustment nut (2) by hand to loosen the clamp (3). To re-tighten,
manually turn the adjustment nut to tighten the clamp, then fold the
lever.
Warning: make sure you have properly tightened the mechanism
before using the bicycle. If the lever can be operated with minimal
manual pressure, it means that it is not sufficiently tightened. The
adjustment nut must therefore be tightened
without the use of tools .
Seat adjustment
A. When adjusting the seat to its lowest position, make sure that it
does not touch any component of the bicycle, for example the
luggage rack.
Also, be careful not to exceed the minimum
seat post insertion mark . This insertion mark should never be
visible when the bicycle is in use.
Closed
Open Adjustment nut