Operating Instructions and Parts Manual
6
PC1
MOTOR BRUSH REPLACEMENT
PC1 Model is equipped with lifetime brushes. Brush replacement is
not necessary.
TROUBLESHOOTING CHART
Symptom
Possible Cause(s)
Corrective Action
Pump will not start or run
1. Blown fuse
1. If blown, replace with proper sized fuse or reset
breaker
2. Low supply voltage
2. Voltage of battery must match the voltage of the
12 V pump
3. Worn brushes
3. Replace brushes (PC2 Only)
4. Impeller blocked
4. Remove blockage
Pump will not prime or retain prime after
operating
1. Air leak in suction line
1. Repair suction line by tightening inlet connection
or replace
2. Impeller blocked
2. Remove blockage
3. Worn seal
3. Replace seal
4. Suction lift too high
4. Lower pump
5. Hose kinked or looped
5. Straighten hose
6. Fittings not tight
6. Tighten fittings
7. Suction hose out of water
7. Submerge suction hose end
8. Clogged inlet
8. Clean inlet
Flow rate is too low
1. Inlet hose plugged or kinked
1. Clean or replace
2. Low supply voltage
2. Voltage of battery must match the voltage of the
12 V pump
Shaft seal leaks
1. Worn seal
1. Replace seal
2. Shaft grooved
2. Replace pump
3. Pump head loose on motor
3. Insure proper assembly and no obstruction,
tighten bolts
LIMITED WARRANTY
For one year for PC1 model from the date of purchase, from an authorized dealer, Wayne Water Systems will repair or replace, at its option for the original purchaser,
any part or parts of its Multi-Use Pumps or Water Pumps (“Product”) found upon examination by Wayne Water Systems to be defective in materials or workmanship.
Please call Wayne Water Systems (800-237-0987) for warranty instructions. Be prepared to provide the model number and the serial number when exercising this
warranty. All transportation charges on Products or parts submitted for repair or replacement must be paid by purchaser. This Limited Warranty is not transferrable.
This Limited Warranty does not cover Products which have been damaged as a result of accident, abuse, misuse, neglect, improper installation, improper
maintenance, or failure to operate in accordance with WAYNE’s written instructions.
This Limited Warranty does not cover Products which have been damaged as a result of accident, abuse, misuse, neglect, improper installation, improper
maintenance, or failure to operate in accordance with Wayne Water Systems’ written instructions.
THIS WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, OBLIGATIONS OR AGREEMENTS, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, AND ANY RIGHTS OR REMEDIES AGAINST ANY PERSON OR ENTITY UNDER THE
UNIFORM COMMERCIAL CODE OR OTHERWISE WITH RESPECT TO THE SALE OF THE PRODUCT. THE REMEDIES AND OBLIGATIONS STATED IN THIS WARRANTY
ARE THE SOLE AND EXCLUSIVE REMEDIES OF AND OBLIGATIONS TO THE OWNER FOR ANY AND ALL MATTERS ARISING WITH RESPECT TO OR IN ANY WAY
CONNECTED WITH THE PRODUCT, REGARDLESS OF THE SOURCE OR PROVIDER OF SUCH GOODS. IN NO EVENT, WHETHER AS A RESULT OF BREACH OF CONTRACT,
WARRANTY TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL WAYNE WATER SYSTEMS OR ANY AFFILIATE BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
You
MUST
retain your purchase receipt along with this form. In the event you need to exercise a warranty claim, you
MUST
send a
copy
of the purchase receipt along
with the material or correspondence. Please call Wayne Water Systems (800-237-0987) for return authorization and instructions.
DO NOT MAIL THIS FORM TO Wayne Water Systems.
Use this form only to maintain your records.
MODEL NO._____________________ SERIAL NO._________________________ INSTALLATION DATE __________________________
ATTACH YOUR RECEIPT HERE
Summary of Contents for PC1 Series
Page 8: ...8 NOTES...
