356914-0004 REVC 04/06/2020
5
©Copyright 2020 Wayne Dalton, a division of Overhead Door Corporation
Verify that the door installation can be accomplished before proceeding:
• Locate the work order “DOOR INSTALLATION DATA” sheet, see FIG 2, inside the door hardware box.
• Does the wall opening shown in FIG 3 match the Opening Width and Height shown on the “Door
Installation Data” sheet?
• Are the guides you received suitable for the jambs? Compare the guides type shown on the “Door
Installation Data” sheet with FIG 4.
• Can the guides be installed plumb?
• Check the sill for level. If sill is not level, mark the high sill location on the low side jamb.
• Guides are designed to rest on counter/sill.
Header
Opening
Height
Jamb
Sill
Opening Width
FIG 3
FACE OF WALL MOUNT
G
BETWEEN JAMB MOUNT
G
FIG 4
PRE-INSTALLATION CHECK LIST
