Waxman LeakSmart 8810200, Installation And Operating Manual

Page: 8 / 21

14. 15.
LeakSmart Water Heater Kit LeakSmart Water Heater Kit
Troubleshooting
Problem What to Check
Status light does not light - Make sure there is power to the outlet.
- Unplug AC Power Adaptor cord from Control
Panel and plug back in.
- If an AC Power Adaptor Extension Wire was
used, unplug both ends and reconnect.
- Make sure fresh batteries are in the Control
Panel.
No water comes out of hot side of faucet - Push Open button to make sure LeakSmart
Valve is open.
- Make sure the manual cold water valve is
open.
- Make sure a manual hot water valve was not
accidentally closed.
No water comes out of hot or cold side of faucet - Make sure main water shut-off valve is
open.
LeakSmart Valve does not operate - Make sure both sides of Leak Sensor are dry.
- Make sure there is power to the outlet.
- Unplug AC Power Adaptor cord from Control
Panel and plug back in.
(continued)
Troubleshooting
Problem What to Check
LeakSmart Valve does not operate (continued) - Unplug 4-pin connector from Control Panel
and reconnect.
- Locate plug connection between Control
Panel and LeakSmart Valve. Unplug the
connection and reconnect, making sure
arrows on side of plugs line up.
- If an AC Power Adaptor Extension Wire was
used, unplug both ends and reconnect.
- Make sure fresh batteries are in the Control
Panel.
Leak Sensor becomes wet but LeakSmart Valve - Unplug long flat wire from Leak Sensor
does not close and reconnect.
- Make sure there is power to the outlet.
- Unplug AC Power Adaptor cord from
Control Panel and plug back in.
- Unplug 4-pin connector from Control
Panel and reconnect.
(continued)