Appendix D – TAP Response Codes - 16
Appendix D – TAP Response Codes
Following is a table of response codes supported by the
WaveWare Paging System
. Please note that a <NAK>
response typically means the message should be resent by the host, and an <RS> response typically means the
message should be abandoned by the host.
Response Code
Definition
110 1.8
Paging system supports TAP Specification
v1.8
211 Page(s) Sent Successfully
Paging message(s) successfully delivered.
This message is accompanied by an <ACK>
510 Invalid character in pager ID
Pager ID field contains illegal characters.
This message is accompanied by an <RS>
511 Invalid pager ID - not in database
Pager ID was legal and 1 to 4 characters in
length, but didn’t match database lookup.
This message is accompanied by an <RS>
512 Temporarily cannot deliver. Queue full.
Try later
Paging System input buffer is full. This
message is accompanied by an <RS>
514 Checksum Error. Exp XXX; Got: YYY
Checksum didn’t match message block. This
message is accompanied by a <NAK>
Note:
<ACK>, <NAK>, and <RS> are only representations of the lower order ASCII control characters output by the paging
system. <ACK> represents Hex 06, <NAK> represents Hex 15, and <RS> represents Hex 1E.
