56
•
SmartSensor V User Guide
After selecting the
Automatic
button, many of the options on
the right side of the screen are grayed out. Begin with auto con-
figuration, and if you need to make further adjustments, you can
manually configure lanes as well.
Starting automatic lane configuration
Figure 49.
Confirming automatic lane configuration
1
Go to
Edit > Lane Configuration
.
2
Click the
Automatic
button.
3
If you would like to set constraints on the configuration through
the
Edit Range Blinders
or
Manage Gain
buttons, do so now.
For more information on these options, see the following
sections.
4
Click the
Restart
button in the bottom-right corner of the
screen.
5
When the pop-up appears, click
Yes
. SmartSensor Manager will
now automatically begin detecting and configuring lanes, and
the screen will show a visual depiction of the lanes and vehicle
detections in real time.
6
Save the configuration by clicking the
Finished
button in the
bottom-right corner.
Note.
Free-flowing
traffic in each lane
is required for
proper configuration.
The time required
for configuration
depends on the
volume of traffic
present in the lanes,
but is typically only
a few minutes.
