Chapter 3: Installing Power, Surge Protection, and Communications
•
27
Figure 21.
Attaching the pole-mount box
1
Find the mounting brackets that were included in the pack-
age and attach them to the back of the Surge Preassembled
Cabinet.
2
Use Band-It or a similar clamping system to attach the Surge
Preassembled Cabinet to the pole.
Lightning
Surge
Protection
Wavetronix
Pr
ot
ec
ted
Pr
ot
ec
ted
Click!
200
RS
-485
RS
-232 DCE
To Smar
tS
ensor
GND
GND
RD
TD
CTS
RTS
GND
485+
485-
GND
-DC
+DC
To T
raffic C
abinet
GND
GND
RD
TD
CTS
RTS
GND
485+
485-
GND
-DC
+DC
GND
GND
RD
TD
CTS
RTS
GND
485+
485-
GND
-DC
+DC
Figure 22.
Connecting sensor cable to terminal blocks
3
Insert the sensor cable (the pigtail cable coming from the
sensor) through the rightmost cable grip on the bottom of the
box. Twist the cable grip to tighten.
4
Start connecting conductors to the terminal blocks marked “To
SmartSensor”: insert the red conductor into the round hole
on the plug portion of the +DC terminal block. Insert a small
screwdriver into the square hole above it, and rock upwards to
secure the conductor in place.
