74
•
SmartSensor Matrix User Guide
Adding delay/extend time for a channel
Figure 80.
Adding delay/extend settings
1
Click the
Edit Channel
button.
2
Click anywhere in the top-right part of the Edit Channel window
and the Output Settings window will appear for that channel.
3
Add delay or extend time using the up/down arrows.
Changing detector input and phase
Figure 81.
Changing the detector input and phase
1
Click the
Edit Channel
button.
2
Click anywhere in the top-right part of the Edit Channel window
and the Output Settings window will appear for that channel.
3
Use the up/down arrows to change both the Detector Input and
Phase.
Note.
These settings
are for reference
purposes only
and do not affect
sensor or controller
performance.
