Wavetronix SmartSensor HD, User Manual

Page: 18 / 109

Chapter 2: Installing the SmartSensor HD
•
17
Figure 9. Rotating the sensor on a hill: incorrect (left) and correct (right)
3 If the sensor is installed on a road with an uphill/downhill grade,
rotate the sensor so that the bottom edge matches the grade
of the road (this will require the purchase of a rotating sensor
backplate).
4
Once you are satisfied with the sensor alignment and position-
ing, tighten all bolts in the mount.
Applying silicon dielectric compound
Figure 10.
Applying the compound
1
Tear the tab off the tube of silicon dielectric compound that
came with the sensor.
2
Squeeze about half of the compound on the connector at the
base of the sensor.