Wavetronix SmartSensor HD User Manual Download Page 95

Page: 95 / 109

•

SmartSensor HD User Guide

Figure 88.

Export window

When the download is complete, the Export window will appear,

showing the following information about the downloaded file:

its name, the date it was downloaded, information about the

sensor, the number of intervals downloaded and the time frame

that the downloaded data covers.

There are three formats you can view or export the downloads

in: a comma-delimited (.csv) file, a Microsoft Excel file, or a

Wavetronix-specific text format that opens in a text editor like

Notepad. To view the downloaded data, click the desired for-

mat’s icon on the

View: (choose format)

line.

To export the downloaded data, click the checkbox next to your

desired format on the

Export: (choose format & location)

line.

Click the magnifying glass icon to change where to save the

file, if desired, and then click

Export

Summary of Contents for SmartSensor HD














































































































Search results

Summary of Contents for SmartSensor HD

Reviews:

Related manuals for SmartSensor HD

Brands by name

Popular brands

Wavetronix SmartSensor HD, User Manual

Search results

Summary of Contents for SmartSensor HD

Reviews:

Related manuals for SmartSensor HD

Brands by name

Popular brands