4-40
Using the
Up
and
Down
arrow soft keys, select the CSO Offset
number to change. Use the numeric entry keys or the
UP
and
DOWN
arrow keys to enter a new CSO Offset value.
When exiting out of the CSO/CTB measurement, the unit will
prompt you to turn the carrier back on.
4.11 HOW TO PERFORM SWEEP MEASUREMENTS
4.11.1 Introduction
The Sweep function has two operating modes, Stealth or Sweepless.
The current sweep mode is indicated in the upper right hand corner
of the screen. The Stealth mode allows sweep insertion points to be
injected in vacant spectrum areas. The Sweepless mode only mea-
sures actual system carriers. Any system carrier can be used as a data
point, even scrambled or digital carriers. In either mode, a previously
stored response can be used as a reference to the current measure-
ment. Sweep references are selected in the File setup menu.
Summary of Contents for 3SR
Page 92: ...4 69...
