4-11
Select Channel Plan
Press the
ENTER
key to call up a list of existing channel plans. If the
unit is being used for the first time, the only Channel Plan available
will be the standard NCTA plan. Refer to the "Build Channel Plan"
section to create a channel plan that matches your system. Use the
Up
and
Down
arrow soft keys to scroll through the list. When the
desired channel plan is highlighted, press the
Exit
soft key to activate
the selected channel plan. Channel plans can also be deleted from
the list using the
Delete
soft key. An
OK
and
Stop
soft key is then
displayed to confirm or stop the deletion of the channel plan.
The currently active channel plan (as indicated in the lower right
hand corner of the screen) cannot be deleted. To delete this plan,
first select a different plan by using the arrow keys to highlight
another plan and then press the
Load
soft key. The previously active
channel plan can now be deleted.
Press the
Info
soft key to view the following channel plan informa-
tion:
• Plan name
• The Channel Plan that the plan was based on
• The number of enabled channels
• Date the plan was last modified
• Limits
• Video Signal Type
Video Signal Type
The type of video signal to be measured can be selected using the
UP
and
DOWN
arrow keys (NTSC, PAL).
Channel Tuning Sequence
Use the
UP
and
DOWN
arrow keys to select either numeric order or
frequency order, for the channel tuning sequence.
Summary of Contents for 3SR
Page 92: ...4 69...
